NZXT Sentry 3 Review

NZXT Sentry 3

Front vew of the NZXT Sentry 3.

The NZXT Sentry 3 is a full system fan controller with a touch screen interface. It is compatible with any 3-pin or 4-pin PWM fan and fits in a 5.25-inch drive bay. Once again, NZXT has done a superb job at providing a high-value, touch screen fan control at a budget price ($34.99 on Amazon as of this writing). With 15 watts per channel and 5 channels (for a total of 75 watts), it should meet the power requirements of most users. In fact, the product literature boasts that each channel can accommodate 3 fans. While it’s unlikely you will be running 15 fans simultaneously, it’s nice to have that option.

The Sentry 3 comes in a cardboard box that has large pictures of both the front and back of the controller as well as some features and specifications of the unit. Once you remove the controller from the box, you’ll realize just how large the screen is. The NZXT Sentry 3 offers the largest touchscreen of any single bay fan controller currently on the market (5.4 inches), and the large touchscreen is surrounded by a thin bezel. When powered off, you can see the touch points of the screen, which creates a bit of an eyesore. However, most users will leave the display on, so this should not be a major issue. The power button is near the edge of the screen, and therefore can be hard to press.

There are 5 fan connections, each of which will support a 3-pin or 4-pin fan. Although this controller allows you to connect 4-pin fans, it will not use any pulse-width modulation (PWM) features of such fans, as it controls fan speed through voltage adjustment. If you have fewer than 5 fans, you can unplug the connectors that are not needed. The NZXT Sentry 3 also has a 4-pin Molex connector for power. 2 temperature sensors are provided, but only one can be connected at a time. You also get tape to hold the sensor down, zip ties, screws and a user guide.

NZXT Sentry 3: Installation and Operation

NZXT Sentry 3

Rear view of the NZXT Sentry 3.

Installation of the NZXT Sentry 3 is relatively simple. Place the unit into any available 5.25-inch bay, and once it is screwed in place, connect one end of the fan cables to the controller and the other end to the fans. Connect the controller’s power connector to the power supply. Now, when you power up your computer, the controller should be operational. The screen layout is fairly intuitive. In the top left is the selected fan’s speed. If the fan is being controlled individually, it also shows the RPM. If the fan is linked to other fans, it shows the percentage. [One of the features of this controller is that you can selectively link multiple fans so they all increase/decrease at the same time. Underneath the fan speed is your current temperature reading from the probe. There is a circle in the middle of the display; by clicking on the circle, you can change modes. There are 3 modes: performance, manual, and quiet. In the manual mode, you have full control over the speed of the fans, while in the performance and quiet modes, the fan speed is handled by the controller based on the reading from the thermal probe. To the right of the circle is the powerslide bar which tells you the current percentage. This allows you to adjust the fans in manual mode. Underneath the bar is the channel selector; if you have fans linked together they will show an orange bar above each channel. To the right of the channel selector are the speaker and display switches; these allow you to mute the controller and turn off the display.

The NZXT Sentry 3 is easy to install and the touchscreen is easy to use, requiring only a light tap to operate. There are some minor issues, however, with this controller. One issue is that you cannot manually lower the fans past 40 percent (somewhat common with voltage-controlled fans). Another issue is that when you first boot the computer, the fans run at 100 percent for about 30 seconds before finally ramping down. In addition, when you decrease the speed, the controller can take 15-20 seconds to respond. Finally, the temperature sensors do not seem to be very accurate, although they should be close enough to be effective.

Despite these minor issues, the NZXT Sentry 3 is a good value, and with 15 watts per channel, it should handle even the most powerful fans, or even multiple fans on one channel with a splitter. If you are looking for a high-quality, high-powered fan controller at a reasonable price, the NZXT Sentry 3 should be on your short list.

Specifications:

Model Number: AC-SEN-3-B1
Dimensions: 129mm x 31mm
Material: Steel, ABS Plastic, Capacitive Touchscreen, PCB
Fan Connector: 3-Pin or 4-Pin Finish Textured Injected Plastic
Included Accessories: 4x M3 Screws
Form Factor: Single Bay 5.25″
UPC: 15671011923
EAN: 5060301691173
Connections: 1x Molex, 1x Temperature Sensor, 5x PWM Male Fan Connectors
Maximum Total Wattage: 75 Watts
Brightness Levels: On / Off
Control Modes: Manual / Performance / Quiet
Fan Channel Quantity: 5 Channels
Fan Channel Wattage: 15 Watts
Temperature Range: 0 to 120°C
Minimum Power To Fans: 0%
Screen Size: 5.4 Inches
Screen Type: Capacitive Touch
Fan Control Method: Voltage
Warranty: 2 Years

External Links:

NXZT Sentry 3 on Amazon

Hardware Roundup: 6-7-2013

This week was the week of the Computex trade show (June 3-7) in Taipei, Taiwan, and as a result, a lot of new products were unveiled. In fact, it may be too much for this installment of the Hardware Roundup, so I may post a second installment later this weekend. But here are the main highlights of the past week.

Cooler Master Compile List of Haswell-Compatible PSUs

Hardware Roundup: 6-5-2013 Or, more accurately, they have announced that all of their PSUs are Haswell-compatible. In face, most power supplies support Haswell. Among the improvements introduced with Intel’s Haswell processors, power consumption in idle mode has been reduced from 6W to less that 1W. This might cause some older PSUs to shut the system off when the CPU enters idle mode, or prevent the system from waking up out of sleep mode. If motherboard vendors disable this power saving mode by default, then an upgrade to Haswell will not result in any issues.

Still, you can go to Cooler Master’s website to see the full list of Haswell-compatible PSUs.

Kingston Announces SSDNow KC300

Kingston Digital, Inc. announced the latest addition to its SSDNow family, the KC300 solid-state drive. The SSDs are targeted at business users and replace the Kingston V+200 and KC100 drives. The 2.5-inch SSDs are based on the familiar LSI-SandForce SF-2281 and feature various SMART functions, as well as the option to check data integrity through DuraWrite. KC300 enables users to be more productive as the drive maximizes power efficiencies in notebook PCs. KC300 provides advanced power management via an LSI SandForce second-generation SF-2281 processor, allowing users to do more from a single charge.

The storage devices have a SATA 6 Gbit/s interface and come in capacities ranging from 60 GB up to 480 GB. The SSDNow KC300 SSDs are available in a regular version, which includes just the drive, and an upgrade bundle, which comes with several accessories and software to migrate data to the solid-state drive. The KC300 is available as a stand-alone drive or as an upgrade kit containing cloning software and other accessories for a desktop and/or notebook system. It is backed by a three-year warranty and free technical support.

Asus Unveils Maximus VI

Hardware Roundup: 6-5-2013

The Asus Maximus VI.

Asus announced its first Republic of Gamers motherboard for the mini-ITX form-factor: the Maximus VI Impact. The Maximus VI Impact is a mini-ITX LGA1150 motherboard with the Intel Z87 Express chipset and supports 4th generation Core “Haswell” processors. The CPU is powered through an 8+2 phase VRM design that protrudes the main motherboard in its own PCB. The PCB gets its power through an 8-pin EPS connector. The rest of the board is powered through a 24-pin ATX connector. There are three other daughterboards on the Maximus VI: the SupremeFX Impact, a sound-card with an audiophile-grade 115 dBA DAC, OPAMPs, and audio-grade capacitors; and an mPCIe combo card that lends it 802.11 ac WiFi and Bluetooth 4.0; and an ImpactControl card that gives overclockers POST diagnostic readouts and CMOS reset/restore at the push of a button, right from the rear panel.

The Maximus VI Impact also gives you four SATA 6 Gb/s ports, an eSATA 6 Gb/s port, six USB 3.0 ports (four rear, two by header), six USB 2.0/1.1 ports, HDMI, DisplayPort, gigabit Ethernet (Intel controller), 6-channel SupremeFX Impact audio with 8-channel digital output, a PCI-Express 3.0 x16 slot, and two DDR3 DIMM slots supporting up to 32 GB of dual-channel DDR3 memory. No price has been announced yet.

The product was introduced at Computex, where Asus chairman Jonny Shih challenged the notion that the DIY side of PC gaming is disappearing with the popularity of consoles and the growing influence of mobile gaming. “The core essence of building,” he said, “is the core feeling of accomplishment and satisfaction.” To this end, Asus continues to offer components suited to DIY enthusiasts, and has added several features for performance enhancement.

You can find out more about the Maximus VI at Asus’s product page for the Maximus VI.

Triplex Announces Slot-Powered Radeon HD 7850

Graphics card maker Triplex unveiled a new single slot Radeon HD 7850 2 GB (GDDR5 memory) air-cooled graphics card that relies entirely on the PCI-Express slot for power. It has a base clock speed of 860 MHz and the memory runs at an effective speed of 4.8 GHz. The card can only consume up to 75 watts from the PCIe x16 slot. This card will only be sold through OEM channels and will not be sold directly to consumers.

NZXT Announces HALE82 V2 PSUs

NZXT has announced a new lineup of power supplies at Computex: the HALE82 V2 series. The power supplies are fully modular, 80+ Bronze certified (ensuring efficiency levels up to 85%), and are available in black and white designs. They are built using a single powerful 12V rail to ensure your components get the power they need. For now, the HALE82 V2 will be available in two versions: a 700W unit and a 550W one. They come with a 135mm silent fan. Pricing is $106 U.S.D. for the 550 watt version and $132 U.S.D. for the 700 watt version.

You can find more information about the HALE82 V2, including more detailed specifications, at NZXT’s product page for the 550 watt HALE82 V2 and the product page for the 700 watt version.

Asus Launches ET2702 All-In-One PC

Asus has announced the ET2702, an all-in-one PC, at Computex. The ET2702 is the first all-in-one desktop with QHD resolution; it comes standard with a 27-inch, 2560 x 1440 IPS screen and offers three HDMI in/out ports that allow it to serve as a display for other devices and connect up to three external displays simultaneously.

For now, the ET2702 will include a choice of Intel 4th generation Core processors, a Radeon HD 8990A graphics card, an 802.11ac Wi-Fi that offers transfer speeds of up to 867 Mb/sec and Asus SonicMaster audio technology. In the U.S., the initial configuration will feature a Core-i7-4770 processor, a 2 GB AMD Radeon HD 8890A GPU, 16 GB of RAM, a 2 TB hard drive, 802.11ac and a Blu-ray drive. No pricing information is available yet, but it will reportedly have a price around $2000, and will be available in late July or early August.

You can read more about the ET2702 at the Asus website which has the original press release.

Gigabyte Debuts Z87-OC and Z87-OC Force Motherboards

Hardware Roundup: 6-5-2013

The Gigabye Z87-OC.

At Computex, Gigabyte has debuted a new Z87-based motherboard for Intel’s new Haswell line of processors, a board designed especially for overclockers. They debut a number of interesting features designed to “help enthusiasts and overclockers get the most performance from their hardware, as well as the most enjoyable OC experience possible.”

The board carries an orange and black theme, and has four RAM DIMM slots. It also has the OC Touch, onboard buttons which allow the user to fine-tune the CPU frequency. It also features four PCIe-x16 expansion slots and supports up to four-way Crossfire and SLI. The PCIe slots are spaced every other expansion slot, leaving room for dual-slot coolers. The Z87X-OC also features six USB 3.0/2.0 ports and two exclusively USB 2.0 ports. Gigabit Ethernet is provided through an Intel networking chip. THe board also features 8-channel audio via an ALC892 audio controller. Gigabyte has not yet made pricing and availability information public.

For more information, see Gigabyte’s product page for the OC or Gigabyte’s product page for the OC Force.